A waterborne ultraviolet (UV)-curing coating was prepared on the surface of wood materials with modification of talcum powder and calcium carbonate (CaCO3). When the waterborne UV-curing coatings on the surface of wood materials (WUVCW) was radiated for 1 min by UV (λ = 365 nm) and dried at 40 °C for 10 min, it showed good hardness, adhesion, and impact strength, with controlling the talcum content of 2.0% and CaCO3 content of 1.0%, respectively. When the content of talcum powder was higher than 2%, the mechanical properties and gloss of the WUVCW decreased, and when the talcum powder of WUVCW increase to more than 5%, a matte surface appeared after curing. When CaCO3 and talcum powder were present at the same time, the mechanical properties of WUVCW were better than those of only CaCO3 or talcum powder.
Coatings 2018, 8(1), 9
Paints and Coatings Expert 