WACKER to Present Additives for Biodegradable Plastics at the European Bioplastics Conference

WACKER, the Munich-based chemical group, is showcasing two additives for processing biodegradable plastics at the 16th European Bioplastics Conference: its VINNEX® additive system based on polyvinylacetate technology and its silicone-based performance additive GENIOPLAST® for thermoplastics and engineering plastics. Both additives enhance the processing and material properties of bioplastics. Latest tests show that the products are even more effective when combined. WACKER will present its test findings at the conference, which runs from November 30 to December 1 in Berlin, Germany.

An ideal combination for bioplastics processors: WACKER’s silicone-based performance additive GENIOPLAST® for thermoplastics and engineering plastics (on the left) and the VINNEX® additive system based on polyvinyl-acetate technology enhance the processing and material properties of bioplastics significantly. (Photo: WACKER).

The Munich-based company chose the biopolyesters polylactic acid and polybutylene succinate as representatives of biodegradable plastics for its screening. While biopolyesters are, in principle, considered alternatives to conventional thermoplastics, they are difficult to process and require suitable additives to achieve the property profile customary of thermoplastics. The additives examined were VINNEX® 2504, VINNEX® 2525, GENIOPLAST® Pellet S and GENIOPLAST® Pellet P plus.

The key finding of the screening is the observation that VINNEX® and GENIOPLAST® complement each other in their effects – in both filled and unfilled bioplastic systems. When used together, the processing and performance properties of bioplastics can be optimally adapted to the specific requirements. But there is also another advantage: both additives are more effective when they are used in combination than when they are used separately. Depending on the grade used, VINNEX® either has a particularly positive influence on the polymer melt or on the mechanical properties. The additive ensures that bioplastics can be processed without difficulty. Mixed in with VINNEX®, GENIOPLAST® primarily affects the surface properties of the plastic item, especially in filled systems.

In the bioplastic samples that were tested, GENIOPLAST® acts as a booster and enhances the effects achieved with the VINNEX® additive which had been previously added. In several cases, the silicone additive also improves properties that VINNEX® has no influence on. It is the addition of GENIOPLAST® that reduces surface friction, thus increasing the bioplastics’ scratch and abrasion resistance. This was verified by examination of the depth and roughness of scratches with a confocal microscope.

The unique additive combination furthermore improves the mechanical properties of the final article. Used together, VINNEX® and GENIOPLAST® boost the flexibility and impact strength of bioplastics and, in filled systems, increase elongation at break without impairing thermostability. Plastics modified in this way are thus suitable for applications previously reserved for conventional thermoplastics.

When added in the usual amounts and depending on the individual system, VINNEX® and GENIOPLAST® additives do not hamper the degradability of biopolyesters such as polybutylene succinate, polylactid acid or thermoplastic starch and combinations of these biodegradable polymers.


VINNEX® additives were specifically developed for modifying biopolyesters and starches. These homopolymers, copolymers and terpolymers are based on polyvinyl acetate.

  • VINNEX® 2504 is a powder-form polyvinylacetate-ethylene copolymer. As a soft plastic, it increases the impact strength of bioplastics. Unfilled polylactic acid modified with VINNEX® 2504 is opaque.
  • VINNEX® 2525, a resin available in granular form, is a polyvinylacetate homopolymer. It acts as a production aid. Biopolyesters modified with VINNEX® 2525 are particularly suitable for producing packaging films by blown film extrusion. The additive leaves unfilled polylactic acid highly transparent.

GENIOPLAST® Pellet S and GENIOPLAST® Pellet P plus are silicone-based plastic additives in pellet form. Both grades are universally suitable for compounding all thermoplastics. As active component, they contain a non-crosslinked ultra-high-molecular silicone polymer mounted on pyrogenic silica. GENIOPLAST® Pellet P plus is approved for food contact and GENIOPLAST® Pellet S is the respective grade for technical applications. Both grades reduce friction. They thus act as production aids and enhance the plastic’s end properties.

This Holiday Season, Be Our Santa! Support PCE


Source: Wacker

Note to readers:

  • Please follow us on LinkedIn ,Twitter and YouTube and subscribe to our website and receive notifications of new posts by email.
  • Please click the share buttons below and make a comment.

Explore further

Explore further

Explore further

Explore further

Explore further


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.


You have successfully subscribed to the newsletter

There was an error while trying to send your request. Please try again.

Paints and Coatings Expert will use the information you provide on this form to be in touch with you and to provide updates and marketing.
%d bloggers like this: